8dbi RFID Reader UHF Integrated Reader Parking Access

Description:

JH6008 is an electronic tag reader/writer that works in the FCC 902~928MHz and CE 865~868MHz frequency bands and complies with the ISO18000-6C (EPC C1G2) protocol. It combines a proprietary and efficient electronic tag collision processing algorithm to maintain a high reading rate. At the same time, it realizes rapid reading and writing of electronic tags and can be widely used in various radio frequency identification (RFID) systems such as logistics, personal identification, smart parking lots, access control systems, anti-counterfeiting systems and production process control.

Feature:
1. Based on dedicated reading and writing chip design;
2. Fully supports electronic tags that comply with UHF EPC Gen2 (ISO18000-6C) protocol;
3. Working frequency FCC 902~928MHz, CE 865~868MHz (can be adjusted according to the requirements of different countries or regions using software);
4. Works in broad spectrum frequency hopping (FHSS) or fixed frequency transmission mode;
5. Output power: maximum 30dBm (adjustable), optional 33dBm;
6. Using 8dBi circular polarization or linear polarization antenna, the card reading distance range is 0m~12m*;
7. Support power-on card reading mode, command card reading mode, trigger card reading mode, etc.;
8. DC12V power supply, supports up to 24V power supply;
9. The communication interface supports RS232, RJ45, Wiegand WG26, WG34, GPIO input and output, USB, WIFI, 4G, RS485, etc.;
10. One relay (customized) can control high-power equipment such as speakers, motors, lights, etc.;
11. Support RS485, TCP/IP ModBus protocol to connect to PLC;
12. Tag filtering function: If the RFID device reads the same tag multiple times, it can be set to only send it to the backend server once per unit time;
13. Offline storage function: When the RFID device and server are disconnected from the Internet, the RFID device will automatically save to the local area and record 8,000 pieces of data.
14. Whitelist function: For the RFID electronic tags in the whitelist, the device directly triggers the relay to control the access gate release or the indicator light flashing; the default is 2,000 RFID electronic tags or 10,000 RFID electronic tag data;
*The effective distance is related to the protocol format, external antenna, electronic tag and working environment.

Application:

1. Intelligent Parking Lot
2.Electric Vehicle Management
3.Personal Identification
4.Asset Management
5.Animal Management
6.Objects in and out of warehouse management
7.ETC Vehicle Management
8.Production process management

Specification

Please refer to the above design drawing for the following definitions:
1. Serial port (RS232) interface (connected to the host computer) 2. Network cable (RJ45) interface (connected to the host computer)
3. DC 9-12V power cord (power supply) 4. Relay (3PIN)
5. GPIO input (4PIN) (trigger input)