- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
English English 
Descriptions:
M5 is an ultra-thin metal dual-frequency access control integrated machine, which is used with anti-copy IC card and anti-copy ID card. The card has a unique encryption algorithm and cannot be copied. It is suitable for occasions with high security requirements.
Technical Parameters：
| Working voltage | DC 12V±10% |
| Working current | < 200mA |
| Dimensions | 90mm×90mm×12mm |
| Weight | 180g |
| Ambient temperature and humidity | Temperature: -20℃—65℃; Humidity: 20—90% |
| User capacity | 15000pcs Cards |
| Card reader type | Anti-copy IC card, anti-copy ID card |
| Reading distance | 1－10cm |
Wiring Diagram：
How to set up the management card：
The device is powered off and restarted, and enters a 3-second self-test. The green light flashes quickly and automatically enters the card reading mode. (Within the 3-second self-test) the first card is swiped to add the card, and the second card is swiped to delete the card.
Note: Two management cards (either ID or IC) are required. The first one is the add card, and the second one is the delete card.
Add user cards in batches：
Swipe the add management card, wait for 1 second and then automatically enter the batch add user mode (blue and green lights flash alternately). You can swipe the card individually or continuously. After the operation is completed, swipe the add management card again to exit.
Deleting user cards in batches:
Swipe the Delete Management Card, and after 1 second, it will automatically enter the batch deletion mode (blue and green lights flash slowly alternately). You can swipe the card individually or continuously. After the operation is completed, swipe the Delete Management Card again to exit.
Delete all user cards:
Connect the yellow wire to the ground (or press the exit button), power off and restart the device, the green light flashes quickly to automatically enter the card reading mode, swipe 5 times to delete the card, the blue light flashes quickly to automatically enter the formatting mode, (the formatting time is about 5 seconds, please wait patiently.)
After completion, the buzzer will repeat the beeping sound, the device is powered off again, unplug the yellow wire (or release the exit button), and power it on again.
Free registration door opening function:
Set the registration-free door opening mode: connect the yellow wire to the ground (or press the exit button), power off and restart the device, the green light flashes quickly to automatically enter the card reading mode, and swipe 3 times in a row to add the card; after success, the buzzer will repeat the "beep-beep" sound, the device will power off again, unplug the yellow wire (or release the exit button), and power on again.
Cancel the registration-free door opening mode: connect the yellow wire to the ground (or press the exit button), power off and restart the device, the green light flashes quickly to automatically enter the card reading mode, and swipe 3 times in a row to add the card to cancel the registration-free door opening mode; after success, the buzzer will repeat the "beep-beep-beep" sound, the device will power off again, unplug the yellow wire (or release the exit button), and power on again.
Data replication function:
Copy all user cards to the new access control machine. The device with user data is used as the master machine. The yellow wire of the master machine is grounded (or the exit button is pressed). Connect the wires as shown in the figure below and power on both devices at the same time. The master machine will first flash green light quickly, then flash blue light quickly after copying starts. If the copying is successful, the master machine will make a long "beep-beep-beep-beep-beep" sound continuously. If the copying fails, the master machine will make three short beeps of "beep- ...
